Every WINCO generator is built in our Le Center, Minnesota, manufacturing facility. It gets cold in Minnesota and we understand how to make sure your generator will start when you need it. Each liquid-cooled packaged standby generator comes standard with a jacket heater to keep your engine block warm and ready to start. The PSS40 is no exception. Another key to cold weather starting on the WINCO PSS40 (all liquid cooled models) is the battery charger. WINCO uses a three stage charger that maintains the battery at optimal level without overcharging or reducing the life and performance of your battery.

Engine Features

• Industrial GM 4.3L V-6 engine.
• Liquid-cooled design extends life of generator over air-cooled models.
• 1800 RPM operation is more fuel efficient and is quieter.
• Field selectable between NG and LP gas with the flip of a switch.

Generator Features

• Industrial grade Stamford generator ends.
• Automatic Voltage Regulator provides +/-1% regulation.
• Available in all common voltages.
• Optional generator strip heater (reduces condensation) and Excitation Boost System (improves motor starting) are available.

Control Features

• Complete digital instrumentation monitors and displays engine and generator operating parameters.
• Safety shutdowns are configured to protect the generator and load from conditions that can cause expensive repairs.
• Programmable inputs and outputs allow the generator to easily integrate into larger systems.
• NFPA 110 configurations are available.
• All alarms are visually annunciated on the front panel.
• A 250 event log records important events to aid in troubleshooting and repair.

Other Features

• Galvaneal steel enclosure is strong, corrosion resistant and quiet.
• Critical grade muffler reduces noise output.
• Side panels are completely removable to provide complete access to engine for routine maintenance.
• Oil and coolant drain extensions are included standard.
• Generator is shipped wet.
• 100% load tested.
• Exercise mode is at full speed to properly verify generator electrical performance.
• ETL listed to UL Std 2200.

*This engine is only EPA certified for standby applications. Prime power applications must be locally permitted and the owner is responsible for all engine warranty.

**This generator is available in 50hz and numerous other voltages. Contact the factory for information on configurations not listed in the standard specification sheet.